The representation of data can be done through computers as well as other types of telecommunication devices with the help of signals. These are broadcasted from one device to another in the shape of electromagnetic energy. The signals like electromagnetic can travel throughout vacuum, air otherwise other transmission mediums to travel from one sender to another receiver. Electromagnetic energy mainly includes voice, power, radio waves, visible light, UV light, & gamma rays. In the OSI model, the first layer is the physical layer which is dedicated to the transmission media. In data communication, a transmission media is a physical lane between the Tx & the Rx and it is the channel where data can be transmitted from one area to another. Show
What is Transmission Media?Definition: A communication channel that is used to carry the data from the transmitter to the receiver through the electromagnetic signals. The main function of this is to carry the data in the bits form through the Local Area Network (LAN). In data communication, it works like a physical path between the sender & the receiver. For instance, in a copper cable network the bits in the form of electrical signals whereas in a fiber network, the bits are available in the form of light pulses. The quality, as well as characteristics of data transmission, can be determined from the characteristics of medium & signal. The properties of different transmission media are delay, bandwidth, maintenance, cost, and easy installation. Different Types of Transmission MediaTransmission media is classified into two types namely wired media & wireless media. The medium characteristics of wired media are more significant but, in wireless media the signal characteristics are important. types-of-transmission-mediaGuided MediaThis kind of transmission media is also known as wired otherwise bounded media. In this type, the signals can be transmitted directly & restricted in a thin path through physical links. The main features of guided media mainly include secure, high-speed, and used in small distances. This kind of media is classified into three types which are discussed below. Twisted Pair CableIt includes two separately protected conductor wires. Normally, some pairs of cables are packaged jointly in a protective cover. This is the most frequently used type of transmission media and it is available in two types. UTP (Unshielded Twisted Pair) This UTP cable has the capacity to block interference. It doesn’t depend on a physical guard and used in telephonic applications. The advantage of UTP is a low cost, very simple to install, and high speed. The disadvantages of UTP is liable to exterior interference, transmits in fewer distances, and less capacity. STP (Shielded Twisted Pair) STP cable includes a particular jacket for blocking outside interference. It is used in rapid data rate Ethernet, in voice & data channels of telephone lines. The main advantages of STP cable mainly include good speed, removes crosstalk. The main disadvantages are hard to manufacture as well as install, It is expensive and bulky also Coaxial CableThis cable contains an external plastic cover and it includes two parallel conductors where each conductor includes a separate protection cover. This cable is used to transmit data in two modes like baseband mode as well as broadband mode. This cable is widely used in cable TVs & analog TV networks. The advantages of the coaxial cable include high bandwidth, noise immunity is good, low cost and simple to install. The disadvantage of this cable is, the failure of cable can disturb the whole network Optical Fibre CableThis cable uses the notion of light reflected through a core that is made with plastic or glass. The core is enclosed with less thick plastic or glass and it is known as the cladding, used for large volume data transmission. The main advantages of this cable include lightweight, capacity & bandwidth will be increased, signal attenuation is less, etc. The disadvantages are high cost, fragile, installation & maintenance is difficult and unidirectional. Unguided MediaIt is also known as unbounded otherwise wireless transmission media. It doesn’t require any physical medium to transmit electromagnetic signals. The main features of this media are less secure, the signal can be transmitted through air, and applicable for large distances. There are three types of unguided media which are discussed below. RadiowavesThese waves are very easy to produce as well as penetrate through buildings. In this, the transmitting & receiving antennas no need to align. The frequency range of these waves ranges from 3 kHz to 1GHz. These waves are used in AM & Fm radios for transmission. These waves are classified into two types namely Terrestrial & Satellite. MicrowavesIt is a sightline transmission which means the transmitting & receiving antennas need to align correctly with each other. The distance which is covered through the signal can be directly proportional to the antenna’s height. The frequency range of microwaves ranges from 1GHz to 300GHz. These are extensively used in TV distribution & mobile phone communication Infrared WavesInfrared (IR) waves are used in extremely small distance communication as they cannot go through obstacles. So it stops intrusion between systems. The range of frequency of these waves is 300GHz to 400THz. These waves are used in TV remotes, keyboards, wireless mouse, printer, etc. Some FactorsThe following factors must be considered to design the transmission media like the following. Bandwidth The bandwidth mainly refers to the capacity of data-carrying in a medium otherwise a channel. So, high BW communication channels mainly support high data rates. Radiation The radiation refers to the signal leakage from the medium because of its unwanted electrical characteristics. Absorption of Noise The absorption of noise refers to the vulnerability of the media to exterior electrical noise. This noise can cause data signal distortion. Attenuation Attenuation refers to the energy loss when signal broadcasts externally. The loss of energy amount mainly depends on frequency. Radiation, as well as physical media characteristics, contributes to attenuation. Transmission Impairment CausesThe transmission impairment mainly causes because of the following reasons. Attenuation It is the loss of energy which can be occurred due to the decrease in signal & increase in the distance. Distortion Distortion mainly occurs because of the change in signal shape. This kind of distortion can be observed from various signals which have different frequencies. Every frequency component has its separate propagation speed because they arrive at a different time which leads to the delay in distortion. Noise When data is transmitted above a transmission medium, an unwanted signal can be added to it. So the noise can be created. FAQs1). What is transmission media? Transmission media is a path that transmits the data from a transmitter to the receiver. 2). What are the types of transmission media? The two types of transmission media are guided and unguided. 3). What are twisted pair cables? Unshielded twisted pair & shielded twisted pair 4). What are the examples of transmission media? They are coaxial cable, twisted-pair cable, and fiber optic cable 5). Mention the most commonly used transmission media in homes? They are coaxial cable, twisted-pair, satellite, fiber optics & microwave, Thus, this is all about transmission media and there are some factors that are considered when choosing a transmission Medium like rate of transmission, cost, simple installation, and distances. Here is a question for you, what are the examples of transmission media? What is the various physical transmission media used in a network?Physical transmission media used in communications include twisted-pair cable, coaxial cable, and fiber-optic cable. These cables typically are used within or underground between buildings. Ethernet and token ring LANs often use physical transmission media.
What are the various types of transmission media?Transmission media is of two types are wired media and wireless media.
What are the 3 types of physical media?Types of physical media. Copper wire.. Optical fiber.. Coaxial cables.. What are the five 5 transmission media?They are coaxial cable, twisted-pair, satellite, fiber optics & microwave, Thus, this is all about transmission media and there are some factors that are considered when choosing a transmission Medium like rate of transmission, cost, simple installation, and distances.
|