The gamepad uses inbuilt Bluetooth to connect to the Switch and other compatible devices such as PC and Android. Show With the inbuilt gyro 6-axis motion, dual rumble and analog sticks, D-pad, shoulder and additional buttons - this controller has your Nintendo Switch experience covered. The buttons have a good resistance without feeling mushy while the 5 top centre buttons are similar to switch controllers and are from left to right -, turbo, home, capture and +. The home button is also used to power on the controller and to sync to your Switch by holding it down longer. The controller has a USB C connection so no additional cables are required to connect to your Switch for charging. The Six Axis pro controller has been thoroughly tested by kids and adults and is highly compatible and precise with Nintendo Switch games especially ones that use motion sensing.
With an estimated 6-8hrs of play at full charge and a stable transmission distance of up to 10 metres you can play where and how you chose with confidence. No lag and no drop outs. In cases where your PC, Android or other device doesn't have Bluetooth you could try a wireless USB adapter like the 8BitDo or in the case of PC you can connect via USB. Keep in mind if not connecting to a Nintendo Switch, depending on device and game some functions might be limited. The ergonomic design, asymmetric button layout and quality feel will enhance your Nintendo gaming experience -even for long hours of continuous play. The gamepad comes with a non-slip design, which feels nicer and softer on the hands and will never slip off even with potentially sweaty hands during intense game play. The Nintendo Switch Pro controller aims to satisfy competitive gamers needs. It's size, shape and weight allow for hours of comfortable gaming. Dominate your friends in style with this high performance controller. Check out the ColorWare design studio to match your Nintendo Switch Pro controller to your gaming console. Create custom Pro controllers that suit you with hot hued colors like Spicy and Formula Red! Or pick a shimmery metallic color, like Techno or Cosmic to make your Pro custom controller standout. The controller may have issues connecting if the battery is near empty or empty. Charge it to check if this is the issue. Your controller may not be synced to your switch, try connecting it again. Your controller may not be on, try turning it on again. Button input is not registering.
Press the button or control stick on the controller you wish to test.
Note: The test does not check for these buttons:
-If all buttons appear on screen, your controller has passed. -Next, Test the Pro Controller buttons using a compatible game or application, and ensure that all buttons are responsive.
When the joystick is moved, the device doesn’t respond on the screen. If the left joystick isn’t responding without clear reason, a manufacturing issue could be the cause however there’s a simple fix that requires just 3 steps:
Lastly, turn on the device and find out if the problem is solved! The controller is not turning on, cannot be charged, or hold its charge. Your battery level may be very low. Connect your controller to the Switch console via the provided USB-C cable for about 6 hours or until the orange light at the top of the controller turns off. Your controller’s battery may be defective. If the battery is not holding power for approximately 40 hours of play time, you may have to replace the battery pack. Part: Pro Controller Battery Replacement Tools Required: Phillips #00 Screwdriver The charging cable may be defective and therefore will not properly charge your controller. You may have to get a replacement USB-C cable for your controller. Part: USB-C cable After pressing the power button, you may notice that the LED light at the bottom of your controller flashes from left to right and eventually shuts off. This means that the controller is not properly synced to the Switch console. To sync your controller, use either of the following methods: Sync via USB Type-C: Connect the USB Type-A end into the dock and the USB Type-C end into Pro controller. Press the power button on the controller. The console should now respond to controller input. If not, refer to the latter method. Part: USB-C cable Sync via “Sync” Button:
Your joystick moves on its own and your inputs becomes inaccurate, or the controller is not responding to commands correctly. If the joysticks haven’t been calibrated for a long time, minor drifting could happen. To solve this, go to settings --- controllers and sensors -- stick calibration tool, to re calibrate the Joystick. If the system is not up to date, it might not process inputs from the joysticks correctly. To solve this, go to settings --- system update, to update to the latest system. The controller might not have sync correctly to the Nintendo Switch console. To solve this, go to controllers --- pair new controllers, disconnect all controllers and reconnect them. The base of the joystick might be dusty, which could cause joysticks to drift. To solve this, clean the base of the joystick thoroughly. Tools required: paper towels and rubbing alcohol. The controller in conducted with graphite internally and it may have worn off after significant play time, causing conducting issues and joystick drifting. Was bedeuten die Lichter an den Switch Controller?Was bedeuten die Leuchten an der Oberseite der Joy-Cons? Dabei handelt es sich um die Anzeige der Spielernummer, wenn einzelne Controller und die Switch drahtlos miteinander verbunden sind.
Wie lange braucht ein Switch Pro Controller zum Aufladen?Es dauert etwa sechs Stunden, bis der Nintendo Switch Pro Controller vollständig aufgeladen ist.
Was ist der Sync Knopf pro Controller?SYNC-Knopf
Zum Synchronisieren des Controllers und zum Zurücksetzen der drahtlosen Verbindung mit der Konsole.
Hat der Switch Pro Controller Bewegungssteuerung?Genauso wie die Joy Con hat auch der Nintendo Switch Pro Controller eine Bewegungssteuerung, die unter anderem das Neigen oder Schütteln des Gamepads erkennt und in die entsprechende Bewegung im Spiel umwandelt.
|